Helping you plan your home improvement project, from start to finish

How Much Does Stone Coated Steel Roofing Cost?

Get free estimates from local Roofing contractors.

If you love the look of asphalt, but need a more reliable and durable roof, stone coated steel roofing is your answer. Stone coated metal roofing is not only lightweight, strong and easily installed, but it also stands up to heavy wind and rain. Of course, all these perks don’t come without a few expenditures.

Before you install a stone coated metal roof, review the average stone coated steel roofing costs below. When ready, use ImproveNet to find the best metal roofing contractors near you.

Table of Contents

  1. Stone Coated Steel Roofing Cost
  2. Stone Coated Metal Roofing Cost Factors
  3. Stone Coated Steel Roofing Costs Vs. Asphalt Shingles
  4. Stone Coated Steel Roof Costs Vs. Other Metal Roof Costs
  5. Stone Coated Steel Roofing Prices Vs. Other Roof Material Prices
  6. Stone Coated Steel Roof Basics
  7. Stone Coated Metal Roof Advantages
  8. Stone Coated Metal Roof Problems
  9. Other Materials Used In Stone Coated Steel Roofs
  10. Brands Of Stone Coated Steel Roofing
  11. Styles Of Stone Coated Steel Roofing
  12. Find A Metal Roofer

Stone Coated Steel Roofing Cost

Stone coated steel roofs are not cheap. In fact, stone coated steel roofing costs start at $185 per square, but can increase up to $400 per square (one square covers 100sf). Working with a 1,200sf roof, assuming you hire a roofing contractor, your total installation price will likely fall between $7,000 and $11,000.

  • Average cost of stone coated steel roofing per square: $185 - $400
  • Minimum cost for a 1,200 square foot roof: $7,000 - $8,100
  • Maximum cost for a 1,200 square foot roof: $9,200 - $10,100

Steel metal roofing may be more expensive than traditional shingles, but the investment pays off in the end. These types of roofs last much longer and have more durability than asphalt shingles. Homeowners actually end up saving money due to the low maintenance costs. The plus side of this is that the roof will most likely never need replacing again. However, bear in mind, because this type of roofing is fairly new, it may be hard to find a qualified installer.

How Much Does Stone Coated Steel Roofing Cost

Stone Coated Metal Roofing Cost Factors

More than likely, the cost to install a stone coated metal roof will fall in the range above. However, if you’re flexible with the design or timeline of your roofing project, you may be able to reduce your metal roofing cost. You won’t be able to control all factors below, but knowing all before your embark on a new stone coated steel roof will surely help you keep costs down.

  1. Removing Old Roof: Unless you’re building a brand new house, you’ll have to remove the old or dated roof before you install a new one. Sometimes, you can install stone coated steel shingles over your existing roof, but as any roof inspector will tell you, it depends on your existing material. If you don’t have to remove an existing roof, you just saved at least $1,000.
  2. Roof Pitch: Some roofs are flat and others are angled, or have a pitch. As you can imagine, it’s not only more dangerous to install a new roof with a pitch, but it requires more materials. Therefore, stone coated steel pitched roofs cost more than flat roofs.
  3. Roof Size: All roof material and labor costs depend on the size of your roof. Clearly, the larger the roof, the more you’re going to pay to install a stone coated metal roof.
  4. Style: Stone coated steel roofing can resemble shakes, shingles or tile. Steel Shingles are the least expensive.
  5. Thickness: Stone coated roofs come with different thicknesses, which is measured by the gauge. Thicker roofs cost more than thinner roofs.
  6. Roof Layout: Some residential roofs have various levels, complex designs and corners or other uncommon characteristics. Sadly, all these facets make installation that much harder. Therefore, your stone coated steel roofing cost will increase.
  7. Time of Year: To no surprise, more roofing installations take place during the summer, or peak roofing season. To lower your metal roofing installation price, try to install your new roof in late fall or early spring.
  8. Labor: No roofing contractor is alike. An experienced metal roofer will charge more than an inexperienced roofer. Therefore, you must get multiple roofing estimates to ensure you find the most appropriate roofer for your budget and project.

Stone Coated Steel Roofing Costs Vs. Asphalt Shingles

Despite the rising popularity of metal roofs, asphalt shingles still reign supreme. When homeowners think of traditional roofs, they think of asphalt shingles. In fact, even for those who do install stone coated steel roofs, most install shingle styles.

Beyond the physical characteristics, there are important distinctions all researching homeowners must know before they install stone coated metal roofing. Most importantly, you have to see the cost differences.

Traditional asphalt roof shingles costs range between $50 and $200 per square. Therefore, stone coated steel roofs are usually at least double the cost of asphalt shingles.

However, despite the higher upfront costs, stone coated steel roofs certainly hold a few advantages over traditional asphalt shingles:

  • Stone coated steel roofs use recycled materials. Asphalt shingles do not.
  • Metal is more energy efficient.
  • While stone coated steel is a bit harder to install, their weights are roughly the same.
  • Stone coated steel is more durable and will require less repairs over its lifetime.
  • You can receive 50-year warranties with stone coated steel roofs.
  • Stone coated metal roofs require less cleaning.

Stone Coated Metal Roofing Price

Stone Coated Steel Roof Costs Vs. Other Metal Roof Costs

Stone coated metal roofing is terrific choice for many homeowners across the country. However, it’s not the only metal roofing option on the market. From tile to standing seam, you have a few alternatives.

If cost is a factor in your roofing installation decision, see all metal roofing material costs below.

Roofing Material

Minimum Cost

Maximum Cost

Galvalume Roofing

$72/square

$200/square

Standing Seam Copper Roofing

$100/square

$200/square

Metal Tile Roofing

$300/square

$1,000/square

Galvanized Metal Roofing

$300/square

$1,800/square

Steel Roofing

$350/square

$1,150/square

Steel Shingle Roofing

$360/square

$840/square

Standing Seam Metal Roofing

$400/square

$650/square

Copper Roofing

$400/square

$1,500/square

Aluminum Shingles

$600/square

$1,500/square

Tin Roofing

$660/square

$1,250/square

Metal Roofing

$750/square

$1,000/square

Aluminum Roofing

$889/square

$1,125/square

Zinc Roofing

$1,000/square

$2,000/square

Stone Coated Steel Roof Installation

Stone Coated Steel Roofing Prices Vs. Other Roof Material Prices

Metal is a durable and strong material that can hold in even the worst of circumstances. Nonetheless, some homeowners prefer traditional asphalt, rubber or various other roofing materials. Whether you’ve decided on a stone coated steel roof or not, it’s always helpful to have a complete cost analysis of its competitors.

Below are all prices for non-metal roofs:

Roofing Material

Minimum Cost

Maximum Cost

Rolled Roofing

$30/square

$100/square

Membrane Roofing

$30/square

$150/square

Fiberglass Shingles

$40/square

$200/square

Synthetic Slate Shingle Roofing

$50/square

$150/square

Asphalt Roof Shingles

$50/square

$200/square

EPDM Roofing

$80/square

$160/square

TPO Roofing

$160/square

$500/square

Stone Coated Steel Roofing

$185/square

$400/square

Slate Shingle Roofing

$189/square

$272/square

Rubber Roofing

$250/square

$400/square

Modified Bitumen Roofing

$273/square

$521/square

Foam Roofing

$300/square

$500/square

Torch Down Roofing

$300/square

$600/square

Wood Shingle Roofing

$378/square

$500/square

IB PVC Roofing

$400/square

$600/square

Composition Shingles

$480/square

$1,600/square

Wood Shake Roofing

$500/square

$800/square

Cedar Shake Roofing

$525/square

$666/square

Red Cedar Shingle Roofing

$600/square

$900/square

Terracotta Roofing Tiles

$600/square

$1,500/square

Cedar Roofing

$652/square

$848/square

Standing Seam Roofing

$699/square

$884/square

Tile Roofing

$700/square

$800/square

Clay Tile Roofing

$2,000/square

$5,000/square

Stone Coated Steel Roof Basics

Stone coated steel roofing was developed over 50 years ago in New Zealand. After production, stone chips are laid over the metal, which is then attached to the steel piece with acrylic film. It was normally mounted on wood strips called battens, but as the trend for stone covered steel roofing moved into the U.S., the need for battens was modified in order to apply it over existing asphalt or wood shingle roofs. This is especially helpful against climates with heavy wind and rain.

Stone Coated Metal Roofing Cost Factors

Stone Coated Metal Roof Advantages

We’ve touched on a few of the benefits of not only stone coated steel roofs, but all metal roofs. After all, there better be plenty of perks given the increased installation cost. Yet, there are a few more benefits all should be aware of.

First, the average warranty on stone-coated steel roofing is 50 years. In addition to the extra security via a warranty, it’s very durable. Steel roofs can not only handle wind and hail, but most metal shingles can also withstand flame and fire. Some insurance companies offer discounts on stone coated steel roofs due to its fire and weather resistance. A regular asphalt roof would not be able to stand up in hurricane winds.

Stone coated steel roofing also limits teardown costs as it can be installed right over existing asphalt shingles. It’s lightweight at about 1.3 lbs. per square foot and is energy efficient with a low environmental impact. Metal roofing is mostly recycled content. This helps to conserve natural resources and energy.

Steel roofs add resale value to your home. Steel also does not fade in the sun from UV rays, and color does not dull. It can even reduce energy bills due to its ability to actually reflect UV rays. Steel roofs are also corrosion resistant and can ward off dimpling from hail damage.

Because of its resistance to weathering, the elements and virtually non-existent roof repair costs, stone coated steel roofing is an optimal choice for almost anyone planning on living in their home for a long time.

Stone Coated Metal Roof Problems

Metal roofs are not perfect. Despite the abundance of privileges mentioned above, there are some disadvantages to stone coated steel roofing as well.

Firstly, the upfront costs are more than regular asphalt shingles. Beyond higher costs, some roofers do not work with stone coated steal. Therefore, finding a reliable stone coated steel roof installer is a bit more challenging that finding an asphalt roofer.

In terms of design, natural stones used in stone coated steel roofs may create color inconsistencies. Contributing to different colors is also rust. Metal roofs use exposed fasteners, which can rust in time due to water exposure or trap moisture within. Since the panels overlap and do not interlock, snow, rain or wind could get through.

Finally, noise can be a deterrent for some. Unless you enjoy the sound of rain (which many homeowners do), you may have to install a dampening underlay.

Stone Coated Metal Roof Problems

Other Materials Used In Stone Coated Steel Roofs

Beyond the actual steel, there are of course other materials involved with any metal roofing installation. Materials used in the building of stone coated stainless steel roofing include roof vents, flashing for piping, ridge vents and gutter protection. These can all be made with stone coated stainless steel. Other materials that should be used are rake covers, starter strips, valleys, sealant and attachments.

If you live in hurricane-prone area, such as Florida, do not use battens. Batten roofs work better in areas where hail could be a problem. It’s undoubtedly easier to install stone coated steel roofing without battens because of its prime wind resistance. Batten-less installations of steel roofing do not need excessive wood framing to make the roof more energy efficient. Although there is a slight increase in energy efficiency with battens, it’s not enough to make up for the beneficial weather resistance of batten-less roofing. It is, however, necessary to install batten framing when the roof is being laid over an existing wood shingle or if the home doesn’t have an attic.

Brands Of Stone Coated Steel Roofing

There are thousands of metal roof installers across the country, but believe it or not, most purchase stone coated steel roofs from a handful of brands. Whether you’re purchasing materials on your own or not, you must be aware of the leading stone coated steel brands in the nation.

  1. Boral Steel Roofing
  2. DECRA Metal Roofing
  3. Terrabella Metal Roofing
  4. Roser

Styles Of Stone Coated Steel Roofing

Stone coated steel roofs do not all look the same. Luckily for you, stone coated steel roofs can take various styles, ranging from shingles and shakes to tile. Stone coated steel shingles are the least expensive, but all provide a unique design.

  • Stone Coated Steel Shingles: If you want the traditional asphalt shingle design, go with this inexpensive style.
  • Stone Coated Steel Shakes: If you prefer a rustic design, shakes are perfect.
  • Stone Coated Steel Tile: These are low-arch tiles. You can also choose barrel tile, which are high-arched tiles.

Find A Metal Roofer

Although finances and budget do come into consideration with steel roofing, stone coated metal roofs stand the test of time and far outlive asphalt shingles or cheaper roofing methods.

Fortunately, if you’re considering a stone coated steel roof, ImproveNet found the best metal roof installers near you.

Get free estimates from local roofing contractors

Last updated on Apr 24, 2018

Looking for accurate quotes
on your roofing project?

Find pros near you.

Get Free Quotes
No Thanks

Looking for accurate quotes on your project?

  • Get multiple quotes for any home improvement project
  • See pro's rating, reviews, projects and more
  • 100% free, no obligations
  • Only takes a few minutes

Find pros in your area.

Close ×